Electromechanical load limiter LYS-LIM
The electromechanical load limiter model "LYS-LIM" is designed to control the overload in lifting elements such as cranes, hoists, lifts, forklifts or pulling cables in general.
It is an element of easy installation. Its assembly consists of clamping it to the pulling cable and connecting the microswitch contacts to the control of the maneuver to block the operation of the lifting element., when an overload is detected.
It has a special sensitivity for small loads, being ideal to apply in low capacity hoists.
Supplied with connection cable 1,5 m., safety chain and set to specified load.
Technical characteristics
- Ideal to apply on cranes, hoists, elevators and hoists.
- Made with spring steel body, with fully stainless hardware under directive 73/23 / CEE.
- Wide range of cable diameter (5 mm…, 31 mm).
- Wide taring range (200 kg a 8500 kg).
- Max cut micro-breaker. 6 A. / 250 V. AC.
- Maximum dimensions: 177x106x65mm.
- Security coefficient: 5.
- Working temperature -30ºC to + 60ºC.
- Precision +/-1%.
- Choices:
- Microswitch with IP-67 protection.
- 2º microrruptor.